Water Heater Maintenance Tips for Homeowners
As a homeowner, it is very important to have a good water supply to your house. There are many uses for water. One thing about the water that is very important is the temperature of the water. When the weather is hot, using cold water is not so bad. If the weather is very cold then having warm water is a must. This just shows that owning and using a water heater is vital. Due to the water heater being used so much by homeowners, it is the main consumer of energy in the house. The only way to be able to have the water heater for long is to give it proper maintenance. There are many ways that you can be able to do this. Here, you can be able to read more on how to properly do maintenance of a water heater.
First and foremost you must flush the tank regularly or after a period of one year. If you have a water tank you should always ensure that it is flushed. This is to ensure that there is no sediment build up in it. If there is a high number of sediments then the energy that the water heater will need to heat the water will be very high. At the end, you will get a very high number of sediments.
The second thing that you must do is to insulate the water heater. This is one of the ways that you can be able to ensure the longevity of the water heater. One good insulating material that you should make use of is called insulating foam. This way the heat that is generated will be contained. The end result is that you will have a more efficient water heater. If it is possible you should also insulate the pipes that connect to the water heater.
The third maintenance tip for you to follow is that the air filters should be cleaned. You should be ensuring that the water is debris free. If the air filter is damaged it can be allowed debris to get in. And the debris will damage the water heater from inside. Cleaning an air filter is best done by hand.
One more thing that you should have a look at is the anode rods in the tank. If there are anode rods in the tank then the tank will no rust. If they have rusted too much you must remove them. Here if you do not replace the anode rods, you will get that the water heater has rusted. It is in your best interest to always check on the TPR valve so that you know more about its condition.